MotoCubby
Nomad III - Under-Seat Storage Box for Yamaha Ténéré 700
Nomad III - Under-Seat Storage Box for Yamaha Ténéré 700
Couldn't load pickup availability
The Nomad III is 3D-printed under-seat storage for the Yamaha Ténéré 700 — specifically the 2025–2026 generation. The current-gen T7 has more under-seat space than most riders realize, and a component layout different enough from earlier years that older solutions don't fit. The Nomad III was designed for this generation specifically.
It sits beneath the rider seat and gives you a secure, out-of-sight place for the gear that belongs on the bike — tire plug kit, tools, first aid, documents. Nothing added to the exterior.
The Stock Antenna Location variant is shaped around the Bluetooth antenna right where Yamaha put it, so it drops in with zero modifications. The Relocated Antenna variant uses that space for extra storage instead — it requires moving the antenna and removing the metal tab that it is mounted on.
Made from Polymaker PET-GF15 — glass-fiber-reinforced filament — printed in-house.
Made to order — please allow about a week before it ships. Every box is printed in-house, one at a time. Tracking hits your inbox the moment it's on the truck.
Please confirm fitment below before ordering.
Built for the 2025–2026 Yamaha Ténéré 700
- Fits 2025–2026 Yamaha Ténéré 700 models (see fitment list)
- Two variants: Stock Antenna Location (no modifications) and Relocated Antenna (more capacity, relocation instructions included) — choose based on where your antenna sits
- Holds tools, tire plug kit, first aid, documents
- Polymaker PET-GF15, glass-fiber-reinforced, printed in-house
Specifications
- Overall Dimensions (L × W × H): 10.5" × 6.75" × 1.78" (267 × 171 × 45 mm)
- Top Opening: ~6.0" × 4.5" (152 × 114 mm)
- Weight: 8.2 oz (232 g)
- Material: Polymaker Fiberon PET-GF15 (15% glass-fiber-reinforced PET)
Yamaha Ténéré 700 Fitment Guide
The Nomad III is designed for the 2025–2026 Yamaha Ténéré 700.
Please confirm that your bike matches one of the confirmed fits below before ordering.
Confirmed fits
- US Base — 2025, 2026
- EU Base — 2025, 2026
- EU Base Low — 2025, 2026
- EU Rally — 2025, 2026
- AU Base — 2025, 2026
- JP Base — 2025, 2026
If you're unsure whether your bike has the correct setup, contact us before ordering and we'll help confirm fitment.
If you run into any fitment issues, let us know and we'll correct them at no cost to you.
Installation Notes
Stock Antenna Location variant. Installs with no modifications — it's shaped to fit around the Bluetooth antenna in its factory position.
Relocated Antenna variant. Requires relocating the Bluetooth antenna (step-by-step guide here) and cutting the small metal mounting tab (do not bend the tab, as a bent tab can crack the box) to free up that space for extra storage.
Seat Concepts seats. Seat Concepts seats based on the OEM pan fit with the Nomad line; depending on seat fitment, running without the lid may be preferable if the seat catches.
Lid. The lid is not waterproof or dustproof. It can help reduce dust intrusion, but it will not seal the compartment completely. Its main purpose is to give the storage box a cleaner, more finished look when the seat is removed.
Pair with
For full coverage on the current-gen T7, add the Drifter II pillion storage box. Designed for the same 2025–2026 generation and built to complement the Nomad III — storage front and back without anything mounted to the exterior.
Excelent packaging! Excelent quality! Stock fitment! 👌
I love the product!
• It fits well on the Yamaha Tenere Rally 2025 with the Seat Concepts seat.
• I bought the larger version, so I had to relocate the antenna (an easy task).
• It looks great.
• It was a bit of a challenge to get the seat on the bike the first time, but once you get the hang of it, it’s easy.
Tight fit, should bounce around i n the frame at all.
Well didn’t fix like it was suppose too. I can’t even get it in. Back one worked just fine
Jeffrey, I am sorry that your Nomad III did not fit into your bike. After doing some trouble shooting with you, it looks like the frame rails of your bike are closer together than most other '25 T7s. I am printing out a narrow version of Nomad III (it is only 4mm, narrower) that should fit perfectly.
Waste of money
Takes up too much space
Leaves very little room for spares
I am very sorry that the Nomad III did not meet your expectations. I am happy to process a return for you. When storing tools and spares under your seat, please protect your ECU from any accidental damage.
Great items from these along with a great service
Great idea but made it almost impossible to get my seat on or off. The whole back edge of the larger container snapped off while trying to wrestle my seat off the first time after installing it. Didn't even make it out of the garage before it broke.
I am so sorry hear that happened! I will reach out by email to help trouble shoot what happened and get a new one out to you right away!
My first one did not fit correctly. However, the owner reached out after I left a review and I was sent a new one. Fits great and is a very nice product.
Great product, perfect fit
The design is a great idea, not easy to get the seat on and off once installed. Also could be made out of harder plastic. I broke mine the second time I attempted to take the seat off. 😞
I am very sorry to hear that it broke on you! That should not have happened. A new one has been sent. Please let me know if that happens again!
Could not get it to fit no matter what I tried. It was too wide to get in place correctly
I am so sorry to hear that! I made some changes and made it a little bit narrower and sent it out to you. Let me know how it fits!
Couldn’t be happier! Fit was perfect. Seems very durable and its pretty water resistant. The only thing I wish was is there was more room to make it slightly larger.
Glad I bought it. They fit in perfect, no loose. It is worth to have it.
great accessory highly recommend
Game changing storage space, excellent customer service and top notch fitment. I've got both the pillion and the larger main model on my 2025 and I'm completely loving them. Thanks again for such an epic product!!!
The product is great, the service and the interaction with Bryant was exceptional. The only remark Iwill make is that unfortunately there is no sliding cut out forseen to flawlessly put the saddle… you need to force her way down… this is only concerning the bigger front cubby…the rear is perfect :) thank you for you passion and happy to help if you want some picture in documenting the difficulties that can be found while placing the saddle back in…
Thank you for your feedback! The lack of the sliding cut is by design due to the fact that a sliding cut would drastically reduce the usable space. The way to get around this it to come down from the top with the seat, engage the front hook, then engage the back hooks. I will be posting a video very soon to show how to do this. I will let you know when the video has been posted.